Entry Level and Mid Level Flash Cure Units
<< Flash Cure
& Heat Press Units
ROTARY PALLET ADAPTER
See it in action!
High wattage and close coil density heater, for greater heater surface consistency.
Powerful heaters with built-in heat shields allow Vastex flashes to be set closer to your garment, which increases efficiency and productivity.
Entry Level Flash Cure Unit
- 15 Year Heater Warranty
- 1,625 Watt, 120V or 240V, IR Heater
- On/off power switch
- Heavy duty side handles
- Head leveler to adjust the heater parallel
to the pallet - Heat shields for even heater temperature
- International power cords available
F-100
Shown with optional wheels
REQUIRED RECEPTACLE
F-100
5-15P
F-100-240
6-15P
Mid Level Flash Cure Unit
- 15 Year Heater Warranty
- 1,950 Watt/120V or 2,600 Watt/240V, IR Heater
- Heat control with power lights
- Heavy duty side handles and locking wheels
- Head leveler to adjust the heater parallel
to the pallet - Heat shields for even heater temperature
- International power cords available
F-1000
Shown with standard floor stand
REQUIRED RECEPTACLE
F-1000
5-20P
F-1000-240
6-15P
F-100 AND F-1000 OPTIONS
Auto-Flash
Rotates flash cure head automatically
Optional on F-100 and F-1000 Flash Cure units is an AutoFlash upgrade with HMI controls that rotates the head into place above the pallet of a screen printing press with the touch of a foot pedal, and automatically rotates the head away from the pallet after a user-adjustable dwell time has elapsed. The AutoFlash unit provides an accurate and repeatable amount of time to flash your garment. Both overflashing and underflashing is a problem many people overlook in this important process.
Rotary Pallet Adapter
Allows drying as well as flash curing
The Dual Rotary Pallet Adapter option allows you to additionally use an F-100 and F-1000 Flash Cure Unit as a low cost dryer. After loading a garment on one of the ventilated steel pallets, simply rotate it into the heater zone. Load another garment onto the other ventilated pallet and, when the first garment has cured, rotate the adapter 180° to cure the next garment, and so on. Remove one pallet within seconds and you can flash and cure with the same unit by swinging the head.
Click on the blue Live Chat tab on the right to speak to a Vastex representative.
(Available daily 9:00 AM - 5:00 PM EST, Monday - Friday)
Or click here to REQUEST A QUOTE >>
