Compact Production
Infrared Conveyor Dryer
 

15 Year Heater Warranty
EconoRed I 30 - Infrared Conveyor Dryer
EconoRed I 30 - Infrared Conveyor Dryer
EconoRed-I compact production dryers are an excellent choice for small- to medium-sized shops that need to cure/dry a maximum of 190 or 380* pieces/hr/chamber of textiles screen printed with plastisol, water-based and discharge inks.

EconoRed I dryers are offered in two, 240V models, both with 66 in. (167.6 cm) belt length, and major improvements as standard equipment for 2013.

First is an EconoRed I 30 with a 30 in. (76.2 cm) wide belt and new 4300 watt heater (up from 3500 watts) capable of curing 190+ pieces per hour per chamber.

Second is an EconoRed I 54 with a 54 in. (137 cm) wide belt and two new 4300 watt heaters (total 8600 watts — up from 7000 watts) capable of curing 380+ pieces per hour per chamber.

For 2013, all EconoRed I dryers are also equipped with an Exhaust System that cools the outer cabinet while evacuating moisture and fumes; and a Digital Readout that displays DC volts, allowing you to accurately
repeat or fine-tune drying results at any future time.

RELIABLE
15 Year Heater Warranty

HEAVY DUTY
"X-Series" Conveyor Belt Tracking System with 30" (76 cm) or 54" (137 cm) Teflon coated fiberglass belt

CONSISTENT
DC belt speed motor with digital voltage display

PRECISE
Infrared Focusing System

ADJUSTABLE
2" - 7" (5 - 17.7 cm) belt-to-heater height adjustment

ACCURATE
Digital PID Temperature controller is accurate to +/-1°F

EXPANDABLE
Add 20" (51 cm) chambers and/or 18" (46 cm) belt extensions

WIDE
EC-I-54 has a 54" extra wide belt allows for "All-Over" Prints to cure in single pass

OPTIONS
  • Additional chambers can in 20" (51cm) increments
  • Belt extensions in 18" (46cm) increments
  • Heavy Duty belt motor
    (recommended for longer conveyors)
  • Scrub Air forced hot air
  • Low friction belt aligner
  • Hat support rail
  • Locking casters for easy mobility
 
*Production speeds are estimates and will vary depending on ink
manufacturer, humidity of shop, and other variables.
 
TECHNICAL SPECIFICATIONS
EconoRedI30
EconoRed-I-30
EconoRedI54
EconoRed-I-54
Heater Warranty 15 year 15 year
Defect Warranty 3 year 3 year
Cure times** 190+ plastisol shirts/hr 380+ plastisol shirts/hr
Belt Speed 0-12 FPM (0-3.6 MPM) 0-12 FPM (0-3.6 MPM)
Internal Parts Material
(Heat Resistant)
Aluminum coated steel Aluminum coated steel
Overall Length 66" (168 cm) 66" (168 cm)
Overall Width 43" (109 cm) 67" (170.2 cm)
Overall Height 46" (117 cm) 46" (117 cm)
Belt Width 30" (76 cm) 54" (137.2 cm)
Chamber Length 20" (51 cm) 20" (51 cm)
Chamber Infeed Width 34.5" (88 cm) 58.5" (149 cm)
Chamber Infeed Height
(adjustable)
2" - 7" (5 - 17.7 cm) 2" - 7" (5 - 17.7 cm)
Heater Size 18" x 24" (46 x 61 cm) 2 @ 18" x 24" (46 x 61 cm)
Heat Range (@ Heater) 0-800° F (0-427° C) @ 240V 0-800° F (0-427° C) @ 240V
Heater Wattage 4,300w (1 x 3,500) 8,600w (2 x 3,500)
Electrical Power***
(3 Phase available)
240V / 19A / 1 Phase / 3 wire 50/60HZ
(3 wire = 2 hot - 1 ground)
240V / 37A / 1 Phase / 3 wire 50/60HZ
(3 wire = 2 hot - 1 ground)
Shipping Weight**** 378 lbs (172 kg) 581 lbs (264 kg)
Shipping Dimensions**** 33" x 48" x 40"
(84 x 122 x 102 cm)
73" x 33" x 39"
(185 x 84 x 99 cm)

CE
** Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc..
*** Wire and plug not included. Terminal block provided for on-site electrical hookup. Must adhere to local regulations. Consult licensed electrician.
**** All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications.